EXAMPLE CONFIG BOOT SYSTEM ON SWITCH CISCO:

 

 

Switch#copy usbflash0:cat3k_caa-universalk9.16.06.05.SPA.bin flash:cat3k_caa-universalk9.16.06.05.SPA.bin

Destination filename [cat3k_caa-universalk9.16.06.05.SPA.bin]?
Copy in progress...CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC

 

Switch(config)#boot system flash:/cat3k_caa-universalk9.16.06.05.SPA.bin

 

Switch#write memory
Building configuration...
[OK]
Switch#reload
Reload command is being issued on Active unit, this will reload the whole stack
Proceed with reload? [confirm]

reboot: Restarting system

Booting...
Reading full image into memory.....................................................................................................................................................................................................................................................................................................................................................................................................done
Bundle Image
--------------------------------------
Kernel Address    : 0x5342d6d4
Kernel Size       : 0x365d89/3562889
Initramfs Address : 0x5379345d
Initramfs Size    : 0x16ddecc/23977676
Compression Format: mzip

Bootable image at @ ram:0x5342d6d4
Bootable image segment 0 address range [0x81100000, 0x81bffb30] is in range [0x80180000, 0x90000000].
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
File "flash:/cat3k_caa-universalk9.16.06.05.SPA.bin" uncompressed and installed, entry point: 0x816e0330
Loading Linux kernel with entry point 0x816e0330 ...
Bootloader: Done loading app on core_mask: 0xf